Negotiable
The date of payment from buyers deliver within days
Guangdong
Long-term effective
2021-05-05 03:57
168
Company Profile
Shenzhen New Solution Technology Co., LtdBy certification [File Integrity]
Contact:weikunqiu(Mr.)
Email:
Telephone:
Phone:
Area:Guangdong
Address:Guangdong
Website:http://www.ns-adhesive.com/ http://weikunqiu.tj-runtai.com/
Introduction
This is a low temperature hot melt adhesive. Designed for fast packaging and good bonding. It can be used well in carton packaging,woodworking and assembly.
TYPICAL PROPERTIES
Color and shape | Light yellow/ Round |
Visual inspection |
Transparency |
Translucent |
Visual inspection |
Softening point (℃) |
77-85 |
GB/T 4507 |
Viscosity @ 160℃*mpa.s |
7000~12000 |
Brookfield viscometer |
Peel test PE/steel (N/2.5cm) |
≥60 |
GB/T 2790 |
Application System |
Professional Coating equipment、Hot melt glue machine |
|
Operation temperature |
160-180℃ |
Packing specification:25kg per bag.
Feature:moderate open time;good adhesion;Low temperature hot melt adhesive
OPERATION INSTRUCTION
1 Operation method: spraying, coating or extrusion.
2 Operating temperature: 160-180ºC.
3 Glue viscosity can be adjusted by changing the temperature.
4 Mixing with other glues is not allowed
5 The cover of hot melt tanks should be closed to prevent the adhesive from being contaminated.
6 If the downtime is more than 1 hour, the temperature of the glue melting equipment should be adjusted below 120℃, or the glue should be drained and the power should be turned off.
Product detail
STORAGE
Hot melt adhesive is usually packed in Kraft paper bags with waterproof liner,It should be stored in cool and dry conditions .Storage temperature should not exceed 40℃and humidity should not exceed 45%.Under proper storage conditions, the shelf life is 24 months.
Safety Precautions:
No health hazards are expected when hot melt adhesive is in solid form. However, once melted it is a hot molten plastic that can cause severe burns. Appropriate safety precautions should be used,including insulated hand protection and safety goggles . If the molten plastic comes in contact with your skin, cool the affected area immediately with cold water. Do not try to remove the plastic from the skin. Seek medical attention immediately.For more information on safety protection, please refer to the Material Safety Data Sheet.
Factory
Service
1 Respond to your inquiry in time.
2 Samples are free while you need to pay for the delivery costs.
3 Provide customized packaging or labeling.
4 The customer pays the balance before shipment.
http://www.ns-adhesive.com/